Advertisement
Communication Connection
2
DVM Chiller, DVM S HP/HR, DVM S Eco, CAC, and 2020 FJM models connect to R1/R2
When more than one system is connected to a
single channel, it is recommended that each
outdoor unit address is set manually. This
setting is made on main unit of each system.
Non NASA RAC/FJM & 2020 NASA RAC: Interface module is required for R1/R2
Bottom of panel
9
Use 16/2 stranded
shielded wire only
Daisy chain to
- MIM-R10UN: 2020 RAC Models
R1/R2
- MIM-N01: All Older Models (installed
at IDU, refer to technical documents for
compatibility. )
Advertisement
