Table of Contents
Advertisement
NOTE:
You can move in the picture i.e. change the
zoomed location by using the
6
5
/
(Down) /
(Up) arrow buttons.
To return to normal play
Press ZOOM again. “Zoom Off” is displayed on the
screen and the picture is now in its normal size.
DISPLAYING / CHANGING SUBTITLE
LANGUAGE
It is possible to change the subtitle language from
the one selected at the initial settings to a
different language, if available.
(This operation works only with discs on which
multiple subtitle languages are recorded.)
Press SUBTITLE during play.
When no subtitles are recorded
displayed instead of the selected language.
Press SUBTITLE a number of times until the
preferred language is selected.
When this button is pressed once, the first subtitle
recorded on the disc will display. The rest of the
subtitles recorded will display in sequence for
every press of the SUBTITLE button.
NOTE:
• In some cases, the subtitle language is not
changed immediately to the selected one.
For your convenience:
• When the preferred language is not selected
even after pressing the button several times, it
means that the language is not available on the
disc.
• When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
• If a language is selected, which is not supported
b y t h e d i s c , t h e s u b t i t l e l a n g u a g e w i l l
automatically be the disc’s priority language.
• Usually a circulation will happen while switching
to another language, that is you can cancel the
subtitle by pressing this button a number of times
until “Subtitle Off ” appears on the screen.
All manuals and user guides at all-guides.com
3
4
(Left) /
(Right)
´
will be
CHANGING AUDIO SOUNDTRACK
LANGUAGE
It is possible to change the audio language from
the one selected at the initial settings to a
different language, if available.
(This operation works only with discs on which
multiple audio soundtrack languages are
recorded, if not prohibited by the DVD.)
Press AUDIO during play.
Press AUDIO a number of times until the
preferred language is selected.
For your convenience:
• When the preferred language is not selected
even after pressing the button several times, it
means that the language is not available on the
disc.
When the standby is turned on or the disc is
removed, the audio language is the one selected
at the initial settings. If this language is not
recorded on the disc, only the available language
on the disc will be heard.
VIEWING FROM ANOTHER ANGLE
Some DVD discs may contain scenes, which
have been shot simultaneously from a number of
different angles. For these discs, the same
scenes can be viewed from each of these different
angles using the ANGLE button.
T h e n u m b e r o f r e c o r d e d a n g l e s d i f f e r s
depending on the disc used.
“
Angle y/x ” is displayed shortly on the
screen during playback. This indicates that the
multi-angle scene has just started. Also on unit’s
display ‘ANGLE’ message appears. From that
moment on, the y
angle of total x angles is
th
played and you can change the viewing angle
until the end of the multi-angle scene.
NOTE:
• In SETUP menu, an ‘ANGLE MARK’ option
exists, which, if enabled, will display a continuous
angle mark on the screen as long as multi-angle
scene is available.
Press ANGLE during play.
The current angle is changed.
Ä27
Advertisement
Table of Contents
