Table of Contents
Advertisement
SELECTING THE MODE
You can select the DVD player, Radio, AV or
SCART using the Mode button.
Radio
To get the best performance be sure that AM and
FM antenna is connected to the AV receiver. AUDIO
VFD grid will be highlighted in radio mode.
Adjusting the frequency :
• Press on the left arrow for AM and Right Arrow for
FM. Band name text and MHz, kHz grids will be
displayed on the VFD.
• Press Search Forward or Search Backward to
increase or decrease the frequency till you reach
the desired channel. VFD will display the
frequency.
• You can press Search Forward or Backward
continuously to increase or decrease the
frequency automatically. You can also use Up and
Down buttons for the same operation. Operation
will be stopped when it is tuned to a channel.(Auto
Tune Function) VFD will display the frequency.
Use any button to cancel auto tune operation.
Volume button functions are disabled in auto tune
mode.
Storing the channel in the Memory :
• After adjusting the desired channel you can store
it in the memory . In order to do that ;
• Press on the Select button to enter Memory Set
mode. Program grid is displayed on the VFD. You
can use Return button to cancel Memory Set
mode.
• Press the number button that you want to store
this channel. Use 10+ button to enter two digits.
VFD will display the preset channel number and
its frequency.
You can keep 10 AM channels and 30 FM
channels in the memory.
All manuals and user guides at all-guides.com
Selecting the preset channels:
• Press on the left arrow for AM and Right Arrow for
FM.
• Press the number button of the desired preset
channel. VFD will display the preset channel
number and its frequency. Use 10+ button to enter
two digits.
• Press the Skip Next or Skip Previous button to
increase or decrease the preset channel number.
VFD will display the preset channel number and
its frequency
Selecting Stereo Mode:
• Press on Audio button to enable or disable
stereo property.
AV MODE
You can use AV connection only in Normal
operation. You can switch to your connected Video
Source using mode button. In this connection you
can use your Av receiver as an Amplifier. Standby,
Mute, Speaker Volume and Mode buttons can be
used in this mode .
SCART MODE
You can use Scart connection in Standby and
Normal operation.
IN STANDBY MODE
If there is a Video and Audio signal in AV Input of
receiver, this signal will be given as a SCART
output automatically. Standby, Open/Close, and
Play buttons can be used in this mode.
IN NORMAL MODE
You can switch to your connected Video Source
using mode button. In this connection you can use
your Av receiver as an Amplifier. Standby, Mute,
Speaker Volume and Mode buttons can be used
in this mode .
Ä20
Advertisement
Table of Contents
