Dreamline ASCEND Installation Instructions Manual page 20

10
Measure the bottom of the Door Glass (#05) from the edge of the Vertical Vinyl Seal (#10) to the opposite
edge of the glass. Cut the Bottom Sweep (#19) to that length and install it on the bottom of the Door Glass
NOTE
(#05), pushing it back and up until it rests against the Vertical Vinyl Seal and is flush with the opposite edge
of the glass. Fig 10
1
3
If installing this shower door along with an inline panel, switch to the inline
!
panel manual at this point. If you're installing the door only, continue to
the next step.
2
Fig 10
Parts Needed
Tools Needed
© 2021 DreamLine® All Rights Reserved