Page 2
For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Color options: --- - White...
“Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that DreamLine ®...
To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, and/or damage. Contact DreamLine with any questions or concerns. SLIMLINE SHOWER BASE manual Ver 5 Rev 9 03/2018...
Page 21
TEL: 866-731-2244 FAX: 866-857-3638 REAM INE.COM For more information on DreamLine ® Shower Doors Enclosures please visit DreamLine.com...
Page 22
PRISM LUX / PYRAMID HOWER NCLOSURE NSTALLATION NSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior ® notice. For the latest up-to-date technical drawings, manuals or additional details please refer to your model’s web page on DreamLine.com...
Page 23
“Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that DreamLine will not replace any ®...
If any parts are damaged or missing, please contact DreamLine for replacement. The shipping boxes may contain extra parts not used in your model ® configuration. NOTE: Retain these installation instructions for future reference. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 26
Shower Enclosure Installation 1. Assemble the Wall brackets (11) onto the Stationary glass hinge side (01) and the Stationary glass (03). See Fig. 1 and Fig. 2 for details. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 27
Use the dimensions in the table in Step#2. -The stationary glass must be installed at the correct dimensions for your model size -Make sure the Stationary glass is plumb and level. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 28
5. Place the Stationary glass (01) and (03) back into the designated position, assemble the Wall brackets (14) and tighten the bolts. Be sure to use the gaskets to protect the glass. See Fig. 6 and Fig. 7 for details. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 29
Be sure gaskets are in place to protect the glass. Repeat these steps for the other Support bar (04). See Fig. 8 and Fig. 9 for details. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 30
DO NOT lift the glass using the handle. This could result in damage to the glass and/or serious personal injury. Always use an assistant or a professional grade glass suction cup when handling heavy glass. . 10 “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 31
Notch the ends to fit into the hinge and also around the Bottom anti-water strip (15). Fully press the cut strips onto the vertical edge of the glass door. See Fig. 12 for details. . 12 “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 32
Shower base/threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 14 for details. . 14 “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 33
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces. “PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016...
Page 34
TEL: 866-731-2244 FAX: 866-857-3638 REAM INE.COM For more information on DreamLine ® Shower Doors Enclosures please visit DreamLine.com...
Need help?
Do you have a question about the PYRAMID and is the answer not in the manual?
Questions and answers