ABB A200-L Operation Manual page 21

Operation Manual / A200-L
2 Safety / 2.14 Safe maintenance
WARNING
Risk of falling
When working on the turbocharger, there is a risk of falling.
Do not climb onto the turbocharger or onto attached parts and do not
u
use them as climbing aids.
Use suitable climbing aids and working platforms for work above body
u
height.
Only perform work on the turbocharger when you are in a physically and psychologically
u
stable condition.
Only work with suitable tools, equipment and appliances that function properly.
u
Power tools must be grounded and cables must be undamaged.
u
Keep the workplace clean; clear away any loose objects and obstacles on the floor.
u
Keep the floor, equipment, and turbocharger clean.
u
Have oil binding agents ready and provide or keep oil pans at hand.
u
Clean up any spills.
u
Have fire protection means and extinguishing agents available.
u
Use of assembly devices
Assembly devices are specially constructed and designed for the defined use; they are not
commercially available products.
Use assembly devices only for the described applications.
u
Welding work in the vicinity of the turbocharger
When performing welding work in the vicinity of the turbocharger, always cover the filter
u
silencer to prevent the filter mat from being damaged.
Keep flammable objects and substances out of the vicinity of flying sparks.
u
Cover all connections on the turbocharger so that no foreign objects can enter the tur-
u
bocharger.
Wear personal protective equipment (PPE) for welding operations.
u
Safety during cleaning
If cleaning agents or solvents are used for cleaning, the corresponding material safety data
sheet and the safety instructions in section Hazards due to operating materials and supplies
must be observed.
Observe the material safety data sheet for the cleaning agent or solvent.
u
Wear personal protective equipment (PPE) according to the material safety data sheet.
u
Inspect the electric cables for abrasion and damage before and after your cleaning work.
u
© Copyright 2021 ABB. All rights reserved. HZTL4036_EN Rev.T December 2021