Sealey SA16 Instructions

ITEM PART NO. DESCRIPTION ITEM PART NO.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT:
Declaration of Conformity
180mm Angle Grinder
Model: SA16
Sole UK Distributor, Sealey Group
E-mail: sales@sealey.co.uk
Web address: www.sealey.co.uk
PARTS LIST FOR:
180mm ANGLE GRINDER
SA16
Model:
DESCRIPTION ITEM PART NO. DESCRIPTION
WARRANTY:
INFORMATION:
For Jack Sealey Ltd. Sole importer
into the UK of Sealey Power Tools.
01284 757500 01284 703534
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure that Health & Safety, local authority, and general workshop practice regulations are
p
adhered to when using this equipment.
WARNING!
p
WARNING!
p
3
Use genuine parts only. Unauthorised parts may be dangerous and will
3
invalidate the warranty.
3
3
3
3
WARNING!
p
3
3
3
3
3
3
3
3
3
3
WARNING!
p
3
3
DO NOT
7
DO NOT
7
s DANGER! Use of damaged discs may cause damage and/or personal injury.
Only persons holding a grinding wheel certificate are authorised to change grinding discs.
WARNING! DO NOT
p
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
3
DANGER OF FIRE/EXPLOSION HAZARD
WARNING! The grinding process can produce streams of sparks (especially when grinding metal) which are a potential source of ignition.
o o
DO NOT use the grinder where there are flammable liquids, solids or gases.
7 7
DO NOT allow grinder sparks to make contact with the operators clothing or any other fabric such as cleaning rags. Fabrics
7 7
contaminated with inflammable materials such as petrol, oil, grease, paint and solvents are a particular fire hazard.
To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated with a fire retardant, in
3 3
preference to man-made fibres.
INSTRUCTIONS FOR:
SA16
180mm ANGLE GRINDER
Model: