Table of Contents
Advertisement
Available languages
Available languages
Information codes
If the oven fails to operate, you may see an information code on the display. Check the table
below and try the suggestions.
Code
The temperature sensor is open.
C-20
The temperature sensor is short.
If there is no communication between the
C-F0
main and sub MICOM.
C-F1
Only occurs during EEPROM Read/Write
This code appears when the oven
temperature high.
C-21
In case the temperature rises over the
limit temperature during operation of each
mode. (Fire sensed.)
C-F2
The touch key is malfunction.
C-d0
NQ50J9530_EN_DE68-04354G-00_EN.indd 75
Description
Action
Unplug the power cord of
the oven, and contact a local
Samsung service centre.
Unplug the power cord for
cooling enough time, and
restart the microwave oven.
Stop the oven and then try
again.
Unplug the power cord for
cooling enough time, and
clean the button. (Dust,
Water)
When appear same problem,
contact a local Samsung
service centre.
English 75
2/16/2015 6:39:29 PM
Advertisement
Chapters
Table of Contents
