Samsung NQ50J9530 User Manual page 152

Hide thumbs Also See for NQ50J9530:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting
Problem
There is water left in
the oven.
The brightness inside
the oven varies.
Cooking is finished,
but the cooling fan is
still running.
Pressing the +30sec
button operates the
oven.
Turntable
While turning, the
turntable comes out
of place or stops
turning.
The turn table drags
while turning.
The turn table rattles
while turning and is
noisy.
72 English
NQ50J9530_EN_DE68-04354G-00_EN.indd 72
Cause
There may be water or steam in
some cases depending on the
food.
This is not an oven malfunction.
Brightness changes depending
on power output changes
according to function.
To ventilate the oven, the
cooling fan continues to run for
about 5 minutes after cooking is
complete.
This happens when the oven
was not operating.
There is no roller ring, or the
roller ring is not properly in
place.
The roller ring is not properly
in place, there is too much food,
or the container is too large
and touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
Action
Let the oven cool and then wipe
with a dry dish towel.
Power output changes during
cooking are not malfunctions.
This is not an oven malfunction.
This is not an oven malfunction.
The microwave oven is
designed to operate by pressing
the +30 sec button when it was
not operating.
Install the roller ring and then
try again.
Adjust the amount of food and
do not use containers that are
too large.
Remove any food residue stuck
to the bottom of the oven.
2/16/2015 6:39:29 PM

Advertisement

Chapters

Table of Contents
loading

Table of Contents