• Follow the manufacturer’s user instructions for changing filters / cartridges. Never • Dizziness or other distress occurs substitute, modify, add, or omit parts. Use only exact Bullard replacement parts in the • You taste or smell the contaminant configuration as specified by the manufacturer.
The prefilter (PAPRPF2) must be used with the prefilter cover (PAPRPFCOVER2). Download the Bullard MaxxLife calculator to help measure the service life of your organic cartridge (PAPRFC4) https://www.bullard.com/maxxlife-calculator.
Operational Inspection. 1. PAPR System 1. Battery Charging and Installation • Closely inspect the entire EVA Powered Air-Purifying Respirator (PAPR) Battery charging system including the filter / cartridge, battery, hood and breathing a. Connect the battery charger to a tube.
Page 5
EVA (with LF-Series and RT-Series Hoods) Powered Air-Purifying Respirator (PAPR) System 2. Belt and Backpack Assembly 3. Filter / Cartridge Installation a. With the turbo-blower unit filter side down, orient the lever locks as shown. a. Remove the filter / cartridge...
1. Connect the breathing tube to the hood. 2. Ensure the filter / cartridge used is suitable for the contaminant(s) in question and are compatible with the EVA Powered Air-Purifying Respirator (PAPR) system. 3. Check that the filter / cartridge is properly installed on the turbo-blower unit.
Operating Instructions chin and in a comfortable position. 6. Bring Velcro straps located on rear The EVA Powered Air-Purifying Respirator (PAPR) system has three (3) outer bib on either side of the bib, operating settings: ON/HIGH-SPEED, LOW-SPEED, OFF to the front of your body and attach Operating Settings to front outer bib.
Decontamination Shower 3. Cover the outlet end of the breathing tube with your hand to If wearing the EVA Powered Air-Purifying Respirator (PAPR) system into a completely cut off airflow. decontamination shower, filters should be left installed with a decon shower 4.
90°F) with humidity less than 90% RH. It is recommended to store and • Always charge the battery at room temperature or cooler. At higher transport the PAPR using the Bullard duffle bag to prevent contamination. temperatures, the battery may not accept full charge. If battery feels Ensure the PAPR is clean and dry prior to storage.
Product Warranty any way purporting to modify this warranty shall be binding upon Bullard, unless made in writing and signed by an authorized employee of Bullard. E.D. Bullard Company (manufacturer) warrants to the original purchaser Some states and territories do not allow the exclusion or limitation...
PAPRFC5 EVA Filter EN 12941 B1E1K1P R SL 6 Pack EVABP1 EVA Belt Backplate for EVABELT1 PAPRPFCOVER2 PAPR EVA\EVAHL Pre-Filter Cover for PAPRFC4 & PAPRFC5 3 Pack EVABP2 EVA Belt Backplate for EVABELT2 PAPRPF2 PAPR EVA\EVAHL Pre-Filter for PAPRFC4 & PAPRFC5 120 Pack...
Page 15
EVA (with LF-Series and RT-Series Hoods) Powered Air-Purifying Respirator (PAPR) System www.bullard.com...
Page 16
Bullard Center E.D. Bullard Company Bullard GmbH Bullard Asia Pacific Pte. Ltd. INSPEC International B.V. Manufacturer 2421 Fortune Drive Dieselstrasse 8a 51 Changi Business Park Central 2 Notified Body 2849, Lexington, KY 40509 • USA 1898 Safety Way 53424 Remagen • Germany...
Need help?
Do you have a question about the EVA and is the answer not in the manual?
Questions and answers