Advertisement
4.2.
Attach Flexible Cable to Borescope (fig.2).
4.2.1.
To connect the flexible tube camera with control handle, make sure that the
keyed end of the tube is aligned with the slot in the handle.
4.2.2.
Push the ends together until aligned.
4.2.3.
Twist the threaded knob clockwise until the connection is securely in place.
4.3.
install accessories.
4.3.1.
The accessories (mirror, hooks, and magnet) are attached by positioning the hook
in hole indicated by arrow on lens housing (fig.3).
4.3.2.
Slide on outer sleeve (fig.4) to hold accessory in place.
4.3.3.
The accessories can be used to retrieve small items like rings or screws.
4.4.
switch on camera.
4.4.1.
Press and hold the power switch (fig.1) for about 3 seconds to turn on the camera, the
power indicator will illuminate and the LCD will become viewable.
4.4.2.
When in use, the flexible cable can be bent into various positions to get into awkward
areas.
8
do noT use excessive force.
4.4.3.
Press the power switch to switch off.
4.5.
mirror image
4.5.1.
In real-time monitoring mode. The mirror image can be adjusted by pressing the Mirror
rotate switch (fig.1).
4.5.2.
The images available are shown in (fig.5)
normal
fig.5
4.6.
Led brightness control.
4.6.1.
The 8 levels of LED brightness can be adjusted by pressing the brightness button. Levels are shown as a horizontal bar on the
display.
4.7.
Lcd contrast control.
4.7.1.
The 8 levels of LCD contrast can be adjusted by pressing the contrast button. Levels are shown as a vertical bar on the display.
4.8.
battery charge indicator.
4.8.1.
this is displayed on the top left corner of the screen.
parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
battery removal
See section 4.1
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imporTanT: No liability is accepted for incorrect use of this product.
WarranTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
mirror
normal upside
down
sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
mirror upside
down
01284 757500
01284 703534
fig.2
fig.3
fig.4
www.sealey.co.uk
sales@sealey.co.uk
VS8199
| Issue 1 18/10/16
Advertisement
