Sealey VS8222 Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
operate the tool in a well-ventilated work area.
9
do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
do not use the tool around corrosive chemicals which can damage the tool.
8
do not abuse the flexible cable. Never use the flexible cable to carry the tool.
8
do not drop the borescope, it is not shock proof.
8
Keep bystanders and children away while operating the tool.
9
Keep the tool dry, clean, free from oil, water and grease. use a small amount of mild detergent on a clean cloth to clean the outside
9
of the tool when necessary and store in a dry, childproof area.
Turn the borescope off when not in use.
9
Remove the batteries when cleaning the unit or before storing the unit for a long period of time.
9
When necessary replace all four batteries. Use only the size and type of battery specified.
9
2. introduction
fitted with large 110mm TFT screen and tablet design makes the image incredibly clear but also very portable. Includes the added advantage
of probe storage inside the rear of the case so not requiring additional storage, unlike other units. Features controls for light in intensity, digital
zoom, miror flip function (to reverse image when using a 45° mirror) and image rotation. Waterproof probe pod with IP67 rating and supplied
with 45° Miror, magnetic pick-up, Hook in storage pouch. Powered by 4 AA batteries (supplied).
3. specification
model no ................................................................... Vs8222
camera Ø ...................................................................... 9mm
field of Vision ...................................................................53
Pod length ................................................................... 50mm
camera Probe Length ................................................ 830mm
Adjustable Light Control ................................................... Yes
screen Size ................................................................ 110mm
screen resolution .................................................... 480x272
mirror flip/rotate function ............................................... Yes
Accessories .................... 45° Mirror, Magnetic Pick-Up, Hook
Power source ............................................... 4xAA (supplied)
© Jack sealey limited
instructions for
tablet video borescope Ø9mm camera
vs8222
model no:
o
Original Language Version
fig.1
VS8222 | Issue 1 10/01/17