BLINDS2GO Choices Alcyone White Gold Installation Manual

Before you begin
Fitting the brackets
Top-Fixing
Where the brackets are
screwed into the lintel (or
'ceiling' of the recess)
Top Tip
Top-fixing or face-fixing are recommended for most installations, whereas side-fixing is only
recommended if the width you gave us was taken right at the top of the recess.
We've made a handy video version of this fitting guide, just
click the play button to view it.
If you prefer to print the instructions or simply to follow
step-by-step, just keep reading.
The brackets offer three methods of installation:
Face-Fixing
Where the brackets are
screwed onto a facing surface
(a wall or window frame)
Installation Guide
We will have positioned the controls where you
requested during the ordering process. However if
you decide to swap the side that they are on,
direction of the roll or need to trim the blind further,
the controls can be removed by simply unplugging
them from the tube. This should be done prior to
fixing the brackets.
Note that the end opposite to the controls (the
'pin-end' or 'depression-end') can vary in style. As a
general rule, smaller blinds will be sent with a
cross-shaped pin-end, whilst wider blinds tend to
come with a circular pin-end. The instructions below
are the same for both designs.
Side-Fixing
Where the brackets are
screwed into the side walls of
the recess
Roller Blinds