BLINDS2GO EasiFIT Installation Manual

Pleated blinds

Unpacking the blind and ﬁtting the brackets

Allocate the brackets so that those with the 'winged' area to

the right are used for the left hand side of the blind, and

those with the winged area to the left are used for the right

hand side of the blind.

Brackets

Cord attachments

Brackets

Place the transparent circular pads

onto the back of each bracket.

Then, clip the cord attachments

onto the brackets.

Installation Guide

EasiFIT Pleated Blinds

Take care if using scissors or a knife to open the

internal wrapping - make sure you do not cut the

wrapping on the same side that the cords are

stored.

Table of Contents

Need help?

Do you have a question about the EasiFIT and is the answer not in the manual?

Page 1 Installation Guide EasiFIT Pleated Blinds Unpacking the blind and ﬁtting the brackets Brackets Cord attachments Cord attachments Brackets Allocate the brackets so that those with the ‘winged’ area to Take care if using scissors or a knife to open the...
Page 2 Installation Guide EasiFIT Pleated Blinds Fitting the blind Click the brackets into the window to complete the installation. NB: The bracket fits under the rubber or Mastik seal so that it sits flush to the glass area. If the seal is quite stiff, apply a small amount of washing-up liquid to the area that the brackets will be fitted to ease the installation.