Page 1
FusionSolar Smart PV Management System Connection User Manual (Inverters + SDongleA) Issue Date 2021-11-25 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
About This Document........................ ii 1 Safety Precautions........................1 2 Introduction to the Solution....................4 2.1 Communication Networking of the SDongleA-01 (WLAN)..................4 2.2 Communication Networking of the SDongleA-03 (4G).................... 7 2.3 Communication Networking of the SDongleA-05 (WLAN-FE)................14 3 Cable Connections.........................17 3.1 Connecting Cables for Cascaded Inverters........................
Follow all the safety precautions and instructions provided by Huawei. The safety precautions provided in this document do not cover all the safety precautions. Huawei shall not be liable for any consequence caused by the violation of the safety operation regulations and design, production, and usage standards.
FusionSolar Smart PV Management System over an IP network. Note a: The SDongleA-03-CN Smart Dongle is applicable only to the Chinese mainland. For other countries or regions, Huawei does not provide quality assurance. 2.1 Communication Networking of the SDongleA-01 (WLAN) ●...
Page 15
Customer prepare a standard SIM card of the local carriers (size: 25 mm x 15 mm). Intelligent ● Huawei management system: FusionSolar Smart PV Huawei management system Management System with the software version of SmartPVMS V500R007C00SPC110 or later. You are advised to use the latest version.
Page 17
If the Smart Dongle is not configured with a SIM Customer card, prepare a standard SIM card (size: 25 mm x 15 mm) of a local carrier. Intelligent management ● Huawei management system: FusionSolar Smart ● Huawei system PV Management System with the software ● Device...
● You have obtained the login account and password from the installation contractor or Huawei service engineer. If no account or password is available, create an account. NO TE ● The latest app version is required for device commissioning. You can search for FusionSolar in App Store or scanning the QR code to install the app for iOS.
Page 34
5 Site Deployment and Commissioning ● You have obtained the login account and password from the installation contractor or Huawei service engineer. If no account or password is available, create an account. Figure 5-4 Procedure for creating a PV plant...
Page 40
Connection User Manual (Inverters + SDongleA) 5 Site Deployment and Commissioning ● SUN2000 APP: Search for "SUN2000" in Huawei AppGallery, download the latest installation package, and install the SUN2000 app by following the instructions. NO TE ● In areas (such as the UK) where the FusionSolar app is not available, or when a third- party management system is used, only the SUN2000 app can be used for commissioning.
● You have obtained the login account and password from the installation contractor or Huawei service engineer. If no account or password is available, create an account. Procedure Step 1 Enter the management system address in the address box of a browser: https:// intl.fusionsolar.huawei.com.
● You have downloaded and installed the FusionSolar app which can be obtained by searching for FusionSolar in Huawei AppGallery or scanning the QR code. ● SUN2000 APP: Search for "SUN2000" in Huawei AppGallery, download the latest installation package, and install the SUN2000 app by following the instructions.
● You have downloaded and installed the FusionSolar app which can be obtained by searching for FusionSolar in Huawei AppGallery or scanning the QR code. ● SUN2000 APP: Search for "SUN2000" in Huawei AppGallery, download the latest installation package, and install the SUN2000 app by following the instructions.
Replacing a Faulty Smart Dongle with a Smart Dongle of the Same Model NO TE If SDongleA-01, SDongleA-03, or SDongleA-05 is faulty, only SDongleA of the same model can be used to replace it. Step 1 Remove the faulty Smart Dongle.