Print Server Management Using Ftp - Canon AXIS 1650 User Manual

Print Server Management and Configuration

Print Server Management Using FTP

Editing the config file
Example
FTP Help
52
Having assigned an IP address to your AXIS 1650, as described in "Set
the IP Address" on page 11, you can change the AXIS 1650 parameter
settings using the File Transport Protocol (FTP).
Follow the instructions below to edit the config file using FTP:
1. Log in to the AXIS 1650 by typing:
ftp <IP address>
2. Enter the user id (the default entry is
changed then it must also be entered).
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the AXIS 1650 by typing:
put config CONFIG
It is important that the destination file is specified in capital letters.
Otherwise the edits are temporary and will be lost once the AXIS 1650 has
been rebooted.
How to get and put the config file using FTP from a Command prompt.
> ftp npserver
connected to npserver.
220 AXIS 1650 FTP Print Server v1. June 1 2005 ready.
Name (npserver:thomas): root
By typing in step 3 in the FTP instructions described above, a list of
help
available commands will be displayed.
or in a Command prompt.
ftp <host name>
; if the default password has been
root
AXIS 1650 User's Manual