Replacing The Thread Lifters - Miele HS20 Operating Instructions Manual

After approx. 10–15 seconds, a thin red
line will appear in the left-hand side of
the display.
 Fit the exhaust filter compartment
flap carefully in the bottom of the ex-
haust filter compartment and close
the flap, making sure it clicks into po-
sition.
26

Replacing the thread lifters

(not possible on models with Eco-
TeQ Plus floorhead)
The thread lifters on the suction inlet to
the floorhead can be replaced. Replace
the thread lifters if the pile has worn
down.
 Lever the thread lifters from the slots.
To do so use a suitable tool, e.g. a flat
blade screwdriver.
 Fit new thread lifters.
Replacement parts are available from
your Miele dealer or from the Miele
Spare Parts Dept.