Samsung Jet Bot VR30T80 Series User Manual page 14

Safety information
• Do not look at the transmitting part (a
laser) of the revolving LiDAR sensor
horizontally.
• Be careful not to insert a tool such as a
chopstick into the revolving LiDAR sensor.
Otherwise, the LiDAR sensor may work
abnormally or malfunction.
• Before cleaning, remove objects which are
less than 9 cm height and are lightly on the
floor as the Jet Bot can push along them,
or the objects can be caught in the Jet Bot's
spin brush or driving wheels. (Fixed objects
can be detected by the Jet Bot when its
bumper is pressed and will avoid them.)
• If oil such as cooking oil is on the floor, the
Jet Bot may become stationary because the
floor is slippery. Remove the oil first before
cleaning with the Jet Bot.
VR8000_DJ68-00857C_EN+TH+VI.indb 13 VR8000_DJ68-00857C_EN+TH+VI.indb 13
English 13
2021-04-06 2021-04-06 5:57:43 5:57:43