Table of Contents
Advertisement
Pram Mode
4.
Insert the seat liner (J) into the seat unit to add extra comfort for baby.
5. Insert the bumper bar (E) into the seat unit slots ensuring that the release
buttons are on the outside and you hear a "click".
Give the bumper bar a tug to ensure it's securely in place.
To remove the bumper bar, simply press the release buttons on either or
both sides and lift up.
E
8
Travel System
A car seat (L) and set of adaptors (M) are included to complete the travel
system.
1a. Remove the seat unit from the chassis to t the adaptors.
Line up the adaptors with the chassis housing and press downwards.
J
Listen for a "click" to signal correct assembly.
1b. Place the car seat (L) onto the adaptors. Push down to "click" into place.
Lift by handle to ensure car seat is secure.
Alternatively, attach the adaptors to the car seat rst and then attach the
car seat to the chassis.
WARNING! Never attach the car seat forward facing.
1
M
2
L
25
- Quick Links:
- Parts List
- Chassis Assembly
- Travel System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Panorama XT and is the answer not in the manual?
Questions and answers
We have lost one the clips that hold the wheel on to the pram do you now where we can replacement clips or what the part number is as can’t find the right size
Replacement parts for the Babylo Panorama XT pram wheel, such as clips, can be found on eBay under listings like "Panorama XT Front Wheel X1 Replacement." However, a specific part number for the replacement clips is not provided in the available information.
This answer is automatically generated