Canon CREATIVE PARK (Moving) Clowns out of a cannon Assembly Instructions Manual page 9

(Moving) Clowns out of a cannon : Assembly Instructions
Prepare 2 strings.
Length: 30cm: 1 string
Tightly knot the 2 strings at
around 5 to 6cm from the top.
Wind the string on the slit Note : Make sure the lengths
of Part 39 and glue. from the 2 Parts 39 to
the knot are the same.
10cm: 1 string
Approx. 4cm
Bend the hand and arm slightly toward
you and glue.
Prepare part 38 in the same way.
Glue only the bellows section.
Note : Do not glue
this part.