Ross PTZ-12G Quick Start Manual

Quick Start Guide for PTZ-12G and PTZ-NDI Cameras
1) Camera Connection Panel
Kensington
Lock Port
DC 12V
Input
2) Video Output Switch
Rotate the Video Output Switch to select the video
output format. The arrow points to the current format.
The factory-set default position is 0 : 2160p/59.94.
Tip: Alternatively, you can set the video format using
the web interface. For more information, see Technical
Manual for PTZ-12G and PTZ-NDI (5000DR-353-01).
3) IR Select Switch
The IR Select Switch assigns a number
(1, 2, or 3) to the camera.
When you later use a remote control, you can select
which camera (1, 2, or 3) you want to control.
Remote Control
© 2021 Ross Video Limited. All rights reserved.
Need Help? Our friendly, knowledgeable Ross Video Technical Support staff are always available!
• Telephone +1 613-652-4886; or toll-free 1-844-652-0645 (North America), +800 1005 0100 (International)
1
• E-mail techsupport@rossvideo.com, or visit our website at
• Contact the ROSS VIDEO | HELP CENTER at
IR
Select
Ethernet PoE++ (all models)
NDI|HX (PTZ-NDI model)
Setting Output Mode
0 2160p/59.94
1 2160p/50
2 2160p/29.97
3 2160p/25
4 1080p/59.94
5 1080p/50
6 1080p/29.97
7 1080p/25
8 720p/59.94
9 720p/50
A 720p/29.97
B 720p/25
C 1080i/59.94
D 1080i/50
E Reserved
F Reserved
Number Switch Position
1
1 2 3
2
1 2 3
3
1 2 3
https://support.rossvideo.com/hc/en-us
USB 3.0 12G SDI RS-232
Output Output
Audio
Input
4) Mounting the Camera
a) Remove the foot pads (4 pcs) from the
bottom of the camera by rotating them
counter-clockwise.
Store the foot pads for future use.
b) Using four silver M3 screws
(included), fasten Metal Plate A
to the base of the camera.
Metal Plate A
c) Attach Metal Plate B to the
ceiling, using suitable fasteners.
Note: Allow adequate space for
connecting cables to the back
of the camera.
d) Align the two Metal Plates and slide them together.
Black M3 Screw
e) Fasten the Metal Plates
together using two silver
M3 screws (back) and one
black M3 screw (front).
Screws are included.
www.rossvideo.com
RS-232 HDMI 2.0
Input Output
Output RS-422
Switch
5000DR-351-01