S12 - Harbinger VARI V2300 Series Owner's Manual

SETTING UP / HELPFUL TIPS
• Position the S12 in the desired location, and ensure the speaker is stable.
• Make sure the Power Switch is off.
• Make certain VOLUME knob is turned down.
MAKING THE CONNECTIONS
• Plug connections to Input 1 and 2 from Outputs of signal source.
• See illustrations of common setups below.
• See facing page information regarding Level switch.
CROSSOVER FREQUENCY
• Turn the knob to select a frequency for the crossover.
• Recommended settings for common sizes of speakers are indicated.
PHASE/LEVEL
• For initial use, Phase should be set to 0.
• For initial use, Level should be set to -10.
POWERING UP
• Turn on the power to any devices plugged into Input 1 or Input 2.
• Power ON the S12.
• Slowly turn the VOLUME knob to 12 o'clock.
• Slowly turn up the source volume to the desired level.
S12 in-line with audio source
Set S12 crossover to match the size of
speakers you are sending audio to, or
as speaker manufacturer recommends
Mixer or other source
V2308, V2310, S12 OWNER'S MANUAL
S12 QUICK START GUIDE
SIGNAL/LIMIT/LEVEL
• The SIGNAL LED will light green when input audio is detected.
• If the limiter is triggered, the LIMIT LED will turn RED, indicating the
• If the LIMIT LED comes on when the VOLUME knob is already at a low
PHASE/TIME ALIGNING DELAY
• Set up your system, and play audio through the system to evaluate the
• Try PHASE set to 0, then 180, and leave the switch on the setting that
• Turn TIME ALIGNING DELAY knob until the maximum sub bass is heard.
LINKING MULTIPLE SUBWOOFERS
• If linking multiple subwoofers, plug the OUTPUT connection(s) of the first
• Switch Output Crossover Off.
• Turn the Power On in the order of the audio signal to prevent unwanted
HOOK UP DIAGRAMS
Feed-through from main speakers
Mixer or other source
Switch off crossover if
output(s) will feed
additional sub(s)
6
VOLUME knob should be turned down to avoid distorted sound.
level, try setting the LEVEL switch to +4, and see information regarding
LEVEL switch on facing page.
low frequency response.
provides more low frequency impact.
subwoofer to the INPUT connection(s) of second subwoofer, and continue
the daisy chain to the next speaker.
"pops". First On / Last Off.
Feeding Harbinger Smart Stereo
speakers such as V2308 or V2310
Mixer or other source