ARC2101
Fig.A
Fig.D
Fig.F
1. Rubber cover
2. Screws
3. Decorative cover
4. Screws
5. Top hinge
1.
Close the door and take out the rubber cover
decorative cover ③. (Fig.1)
2.
Unscrew the screws ④ and take out the top hinge ⑤, then remove the door and put door aside
safety. (Fig. 2)
3.
Pull out decorative nail ⑥from left top of cabinet. (Fig.3)
4.
Unscrew the 3 screws ⑦ from the right bottom of cabinet and remove the lower hinge ⑧. (Fig.4)
5.
Pull out cabinet leg ⑨ from the left bottom of the cabinet and fix it onto the right bottom of the
cabinet. (Fig.4)
6.
Fix the lower hinge ⑧ onto the left bottom of the cabinet with screws ⑦. (Fig. 4)
7.
Revolve the door 180 degrees, install the door onto the lower hinge ⑧, then close the door
carefully. (Fig.5)
8.
Fix the top hinge ⑤ onto the left top of cabinet with screws ④, adjust door and install the
decorative cover ③ and the rubber cover
9.
Block the 3 screw holes at the top right of the cabinet with the spare decorative
nail.
Fig.B
Fig.E
6. Decorative nail
7. Screws
8. Lower hinge
9. Cabinet leg
, unscrew the two screws ② and remove the
. (Fig.6)
27
Fig.C