Temperature Setting
The appliance temperature was set in the factory and corresponds to 12°C
1. When connecting to the electrical power supply, the display shows the temperature set
inside the compartment.
2. Press the
button to increase the temperature and button to decrease the
temperature.
3. The set temperature will flash for 5 seconds and the temperature has now been set.
4. LED display will return to show actual temperature inside compartment. Wait for the
temperature change to take effect and put the wine in the cellar.
5. To view the "set" temperature, press the
seconds and shows the set temperature
Attention:
1. If wine cellar is switched off, please wait 3‐5 minutes before restarting the unit.
2. Please connect your wine cellar at least 24hrs after delivery.
or button, the LED display will flash for 5
22