Insulin To Carb Ratio (Ic Ratio) - Insulet Omnipod 5 User Manual

Delivering a Bolus with the SmartBolus Calculator 17
calculates a correction bolus if your glucose is above your Correct Above setting.
In Automated Mode, the Omnipod 5 System will adjust your automated insulin
delivery with the goal of bringing you to your Target Glucose.
To edit Target Glucose or Correct Above values:
1. Navigate to: Menu button (
Correct Above.
2. Tap NEXT.
3. To edit a segment, tap the row containing the segment you want to edit.
a. Tap the End Time field to enter a new end time.
b. Tap the Target Glucose field to enter a new Target Glucose.
c. Tap the Correct Above field to enter a new Correct Above value.
d. Tap NEXT.
4. Repeat the previous step as needed for the remaining segments.
5. After confirming that all segments are correct, tap SAVE.
Note: You can add and delete segments by editing the existing segments.
Minimum Glucose for Calculations
Your Minimum Glucose for Calculations is used to prevent you from delivering
a bolus when your glucose is too low. If your glucose is below your Minimum
Glucose for Calculations, the SmartBolus Calculator is disabled and does not
calculate a bolus. To edit this value:
1. Navigate to: Menu button (
for Calculations.
2. Tap the Minimum Glucose for Calculations field and enter the desired value.
3. Tap SAVE.

Insulin to Carb Ratio (IC Ratio)

The Insulin-to-Carbohydrate ratio (IC Ratio) defines how many grams of
carbohydrates are covered by one unit of insulin. The SmartBolus Calculator
uses your IC Ratio to calculate a meal bolus when you are going to eat. To edit this
value:
1. Navigate to: Menu button (
2. Tap NEXT.
3. To edit a segment, tap the row containing the segment you want to edit.
a. Tap the End Time field to enter a new end time.
b. Tap the 1 Unit of Insulin Covers field and enter a new IC Ratio.
c. Tap NEXT.
) > Settings > Bolus > Target Glucose &
) > Settings > Bolus > Minimum Glucose
) > Settings > Bolus > Insulin to Carb Ratio.
251