Carry In Machines And Equipment; Remove The Shipping Brackets - Yamaha S20 Service Information

3.3 Carry in machines and equipment


Carry in a machine and necessary equipment with great care to avoid accidents.

Protect the floor to avoid damaging it.
Prepare curing sheets.)

When operating lifting equipment such as a hand lifter;

Pay attention to the center of gravity of the machine.

Do not lift it up excessively.

Handle the hand lifter with care.
 If damaging the customer's possessions (the floor, the building, etc.) while carrying in the
machine to the installation site;

Promptly let the customer know and seek for their directions.

Otherwise it may cause a serious problem later on.

Take some pictures of the
doing so.)

Remove plastic wrapping from the machine.
After moving the machine to near the production line or the entrance of the clean room, remove the
plastic wrappings from the machine and the accessories.

3.4 Remove the shipping brackets

See "Checklist for the shipping brackets" for the procedure of removing the shipping brackets
of the machine located temporarily.

Checklist for the shipping brackets of M20, M10 and D10
Axis
LOCK,X-AXIS
LE6-M220Y-00
X-axis
BOLT,HEX,SOKET
1 position
HEAD
M5 × L10 Qty:2
91312-05010
LOCK,Y-AXIS
LE6-M260Y-00
LE6-M260Y-10
Y-axis
BOLT,HEX,SOKET
2 positions
HEAD
M5 × L10 Qty:4
91312-05010
LOCK,Z-AXIS
4-head LE6-M710Y-50
6-head LE6-M710Y-60
Z-axis
1 position BOLT,HEX,SOKET
HEAD
M4 × wL15 Qty:2
91312-04015
(Plastic tiles especially need protection.
(Make sure to get the customer's permission before
damage.
Qty Shipping bracket
SI1604009E-002= S20, S10, M20, M10 and D10 installation procedures
Service Information
Status
6/34
For Service Engineer
Remark
Brackets vary
depending on the
head configuration.