Advertisement
Field service operation and warranty
issues
Siemens can provide competent, well-
trained field service representatives to
provide technical guidance and advisory
assistance for the installation, overhaul,
repair and maintenance of Siemens
equipment, processes and systems. Contact
regional service centers, sales offices or the
factory for details, or telephone Siemens
field service at +1 (800) 347-6659 or +1
(919) 365-2200 outside the U.S.
Designated usage
The RCU is used to connect the Fusesaver
pole-mounted circuit breaker into a utility
SCADA system. Any other use is forbidden,
unless the consent of Siemens has been
obtained.
Changes to any part of the Remote Control Unit or
its accessories, that are carried out by the user or
others, and not previously agreed by Siemens, will
void the warranty of the whole product.
Compatibility
This version of the DNP3 protocol manual is
compatible with the following firmware and
software versions:
Application
Applicable versions
RCU Firmware
Fusesaver Firmware
Communications
module Firmware
Table 1: Compatibility
100
330-60
1537-75
5
Advertisement
