Clearing Paper Jams; Jam In Booklet Lifter Section; Jam In Infeed Section - Canon D1 User Manual

Clearing Paper Jams

Jam in Conveyor Section
• Paper chip jams. (See proce-
dure 1.)
• Transport belts are dirty. (See
procedure 2.)
Jam in Trim Section
• Paper chip jams. (See pro-
cedure 1.)
• Transport belts are dirty.
(See procedure 2.)
Procedure 1
Open the guide and check to see if there are any paper chips left on the booklet feed path. (See
page 3-3.)
Procedure 2
Transport belt cleaning is required. To clean the transport belt, contact your local authorized
dealer.
3-4

Clearing Paper Jams

Jam in Booklet Lifter Section 2

• Paper chip jams. (See procedure 1.)
• Transport belts are dirty. (See proce-
dure 2.)
Jam in Booklet Lifter Section 1
• Paper chip jams. (See procedure 1.)
• Transport belts are dirty. (See proce-
dure 2.)

Jam in Infeed Section

• Paper chip jams. (See proce-
dure 1.)
• Transport belts are dirty. (See
procedure 2.)
CAUTION
When removing jammed booklets
from the trim section, take care
not to touch the blade edge.