[5] Conveyor Section
The booklets delivered from the booklet lifter section are laid out on the conveyor.
*1
Delivery Tray
This tray holds the stacked
booklets. It is removable.
(When the tray is removed, the
conveyor full is not detected,
and the continuous operation is
possible.)
*1
Removing the delivery tray.
1. Loosen two locking knobs.
2. Lift the delivery tray up to remove.
3. Tighten two locking knobs.
Locking Knobs
Handle [TE]
Hold this handle and lift the roller unit when
removing the booklets on the conveyor.
Transport Belts
This belt moves while booklets are being
output, after booklets are ejected, and
transports them.
Delivery Tray
Delivery
Transport
Rollers
Output booklets are
held by this roller.
The position of the
roller is set automati-
cally to match the
booklet size.
Booklet Detect
Sensor
This sensor detects
the conveyor full with
stacked booklets.
Section Descriptions
1-7