Battery Installation - Yamaha EF12000DE Owner's Manual

AE00231
BATTERY
(See page 31 for more details)
Check the fluid level and fill if necessary.
Use only distilled water if refilling is necessary.
Recommended Battery
Lead-acid battery : A capacity of 12V-32A
Installation
) Turn the starter switch to the "STOP" position to prevent accidental short circuit-
1
ing.
2) Attach terminals to a lead-acid battery already charged. Mount the battery onto
the position as specified below, with its terminals facing inward.
3) Insert each long bolt through the specified hole, its tip pointing outward.
4) Put the supporting arm on the long bolts and tighten with the butterfly nuts.
(Push the lead-acid battery all the way inward.)
5) Arrange the wiring so that it won't be damaged by possible vibration caused by
the engine.
6) Only after checking that the engine's starter key is in the "STOP" position,
securely connect the cable with a red, to the positive (+) terminal first. And then
connect the other cable to the negative (-) terminal.
NOTICE
Should the connection be made in incorrect manner, the engine will be dam-
aged.
For the generators used in low temperature below
-5˚C(23˚F), 12V-40A ・ h or larger battery is recommended.
− 13−
・ h or larger.