Removing The M.2 Ssd Module - Clevo P775TM Service Manual

Removing the M.2 SSD Module

Note that the SSD (if installed) is beside the HDD bay.
1. Turn off the computer, and turn it over, remove the battery
2. Remove the screw from the SSD
1
3. The M.2 SSD module will pop-up
6 2
4. Lift the M.2 SSD module up and off the computer
2
6
5. Reverse the process to install a new SSD (make sure that the hexagonal screw
depending upon the size of the module).
a. b.
1
(page 2 - 5).
)
(Figure 5a .
)
(Figure 5b .
)
(Figure 5c .
2
3
is in the correct location
3
c.
2
Removing the M.2 SSD Module 2 - 9
Disassembly
Figure 5
M.2 SSD Module
Removal
a. Remove the screws.
b. The module will pop up.
c. Lift the module out.
2. M.2 SSD Module
• 1 Screw