Removing The M.2 Ssd Module - Clevo NL51CU Service Manual

Removing the M.2 SSD Module

1. Turn off the computer, turn it over to remove the battery
2. The M.2 SSD module will be visible at point
3. Remove the screw (Figure
2
4. The M.2 SSD module (Figure
3
5. Reverse the process to install a new module (do not forget to replace all the screws and bottom cover).
a.
1
b.
(page 2 -
on the mainboard
1
9b)
9c) will pop-up, and you can remove it from the computer.
c.
2
5).
(Figure 9a).
3
3
Removing the M.2 SSD Module 2 - 15
Disassembly
Figure 9
M.2 SSD Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.

3.M2 SATA Module
• 1 Screw