Adding Or Removing Laundry - Miele PWM 508 Mop Star 80 Operating And Installation Instructions

Changing the programme sequence

Adding or removing laundry

You can add or remove items during the
first few minutes after the programme
has started.
 Touch the Start/Stop sensor.
The following will appear in the display:
Add laundry
 Touch the
Add laundry
The programme will stop and the door
will unlock.

Risk of chemical burns from de-
tergent.
When adding or removing laundry,
your skin may come into contact
with detergent, particularly if the de-
tergent is dispensed externally.
Take care when placing your hands
inside the drum.
If suds have come into contact with
the skin, rinse off immediately with
plenty of lukewarm water.
 Pull open the door.
 Add laundry or remove individual
items.
 Close the door.
 Touch the Start/Stop sensor.
The programme will continue.
46
Cancel
programme
sensor.
Once a programme has started suc-
cessfully, the washing machine cannot
recognise any adjustment to the load.
For this reason, if laundry is added or
removed after the start of a pro-
gramme, the machine will always
complete the programme cycle as-
suming a full load.
The door cannot be opened, if:
- The suds temperature is above 55 °C.
The safety lock will remain activated if
the temperature in the drum is above
55 °C. The lock will not deactivate un-
til the temperature has dropped to be-
low 55 °C.