Checking The Accessories; Correcting Circuit Diagrams; Instructing The Operating Personnel - Siemens 8DA Installation Instructions Manual

Completing test operation
=USNJVOTPKV=G=fkpq^iiqflk=fkpqor`qflkp=Ua^=G=oÉîáëáçå=MP
!
Switch on all auxiliary and control voltages.
!
Operate all switching devices for test to verify the perfect operation of all mechanical
and electromechanical interlocks. Do not use force.
!
Check correct indication on switch position indicators at the front of the panels and in
the control room.
!
Switch the circuit-breakers, disconnectors and earthing switches to OPEN position.
14.3

Checking the accessories

The switchgear accessories comprise:
• operating levers,
• keys to operate the switching devices,
• single line diagrams,
• operating instructions,
• warning signs,
• customer-specific consignments.
!
Make the switchgear accessories available in the switchgear room or in a
neighbouring room clearly and ready to hand.
14.4

Correcting circuit diagrams

!
Note any modifications which may have been made during installation or
commissioning in the supplied circuit diagrams.
!
Send the corrected documentation to the responsible Siemens Service Centre so
that the modifications can be included.
14.5

Instructing the operating personnel

!
Hand over the operating instructions to the operating personnel before
commissioning.
!
Make the operating personnel familiar with all technical details and operation of the
switchgear before switchgear acceptance.
!
Hand the supplied double-bit keys for the doors over to the responsible persons.
fåëí~ää~íáçå
49