Table of Contents
Advertisement
6.7 Multipoint mode
The headset can pair to 7 mobile devices and
connect to two at once (Multipoint mode).
To connect to two mobile devices, use the
normal pairing process separately for each
device (refer to section 5.3).
The headset will monitor both mobile devices
and enable you to answer a call on either one
using the headset.
If you are on a call and the other mobile device
receives a call, you will hear a notification in the
headset.
6.8 How to reset
Resetting the headset clears the list of paired
devices.
1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume up
and Volume down buttons until you hear
'Pair mode' and the LEDs flash red and blue.
3. Re-pair the headset to your smartphone
using the normal process (see page 14).
24
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the B650-XT and is the answer not in the manual?
Questions and answers
My b650-XT,want stay paired to my Samsung Galaxy A13 , for over a minute
To keep your BlueParrott B650-XT paired with your Samsung Galaxy A13 for more than a minute, follow these steps:
1. Ensure Proper Pairing: Turn off the headset, then press and hold the power button for about five seconds until the LED flashes blue and red. On your Samsung Galaxy A13, go to Bluetooth settings, find "B650-XT," and pair it.
2. Check Bluetooth Settings: Ensure Bluetooth is enabled on your phone and that "B650-XT" is set as a trusted device.
3. Update Firmware: Use the BlueParrott app to check for firmware updates and install any available updates to ensure compatibility.
4. Prevent Auto-Disconnect:
- Keep the phone and headset within range (about 30 feet).
- Avoid interference from other Bluetooth devices.
- Ensure the headset battery is sufficiently charged.
5. Reset and Re-Pair: If the issue persists, reset the headset by turning it off, then holding the power button for 10 seconds. Forget the headset from the phone’s Bluetooth settings and re-pair it.
If the problem continues, test the headset with another device to determine if the issue is with the headset or the phone.
This answer is automatically generated
What is the ON and OFF button ?
The ON and OFF function on the BlueParrott B650-XT is controlled by the power button. To turn the headset ON, press and hold the power button while the headset is off until the LED flashes blue. To turn it OFF, press and hold the power button again until it powers down.
This answer is automatically generated
How do you turn off and on b650 - XT ?
To turn the BlueParrott B650-XT on or off, press and hold the power button while the headset is off or on.
This answer is automatically generated