Related Manuals for BlueParrott B250-XT
Summary of Contents for BlueParrott B250-XT
- Page 1 U S E R G U I D E Compatible with most Bluetooth phones & Bluetooth enabled computers (Windows or Macintosh ® ®...
-
Page 3: Table Of Contents
30 FCC Notice to Users 11 Pairing with a Computer Voice Dial 31 IC Notice to 12 Multiple Device Pairing Transfer Audio Canadian Users 13 Multipoint Mode Turn Indicator Lights On/Off 15 Proximity Pairing VXi BlueParrott B250-XT+ User Guide ®... -
Page 4: Package Contents
PACKAGE CONTENTS 1. B250-XT+ Wireless Headset with Leatherette Ear Cushion 2. Windscreen 3. Foam Ear Cushion 4. Auto (DC) Charger 5. AC Charger 6. User Guide (not shown) VXi BlueParrott B250-XT+ User Guide ®... -
Page 5: Glossary
Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light will flash). Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash). VXi BlueParrott B250-XT+ User Guide ®... -
Page 6: Charging The Headset
(less than 3 minutes). When the indicator turns green—and stays green—the unit is fully charged. A fully discharged battery will need approximately 3.5 hours to achieve a complete charge. AC Charger Auto (DC) Charger VXi BlueParrott B250-XT+ User Guide ®... -
Page 7: Battery Power Indicators
BATTERY POWER INDICATORS While charging, the MFB’s indicator light shows the level of battery power on your B250-XT+ as follows: Green light: Fully charged. Over 20 hours’ talk time. Red light: Less than a full charge. For best performance, keep charging headset when Indicator Light not in use. -
Page 8: Headset Controls
Volume Volume Down Up/Mute button for 2 seconds until you hear a beep. A mute reminder will be heard every 10 seconds. Repeat button press to un-mute. VXi BlueParrott B250-XT+ User Guide ®... - Page 9 Turn Headset Off (conserves battery power): Hold down the MFB for approximately 4–5 seconds until you hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off. VXi BlueParrott B250-XT+ User Guide ®...
-
Page 10: Pairing With A Phone
When connected, you will hear the voice prompt, “Your headset is connected,” and the blue light will flash indicating that the headset is in Standby Mode and is ready to make or receive calls. VXi BlueParrott B250-XT+ User Guide ®... -
Page 11: Pairing With A Computer
7. To disconnect, use the mouse to right click on the headset icon and select “disconnect” or power off the headset. If you select disconnect you should hear the voice prompt, “Your headset is disconnected.” VXi BlueParrott B250-XT+ User Guide ®... -
Page 12: Multiple Device Pairing
MULTIPLE DEVICE PAIRING The B250-XT+ can pair with up to 8 devices; however, only one device may be connected to the headset at a time, unless the headset is in Multipoint Mode (see page 13). To pair the headset with a Bluetooth cell phone or other Bluetooth device, such as a Bluetooth enabled computer, follow the instructions on pages 10 and 11 of this manual. -
Page 13: Multipoint Mode
3. You will hear 4 rising tones. 4. Once Multipoint Mode is active, shut the headset off. PAIRING the B250-XT+ HEADSET to the FIRST BLUETOOTH DEVICE 5. Get the first Bluetooth device ready to pair to the headset. 6. Put the headset in Pairing Mode (see page 10). - Page 14 11. When the second Bluetooth device is connected, turn it and the headset off. USING TWO BLUETOOTH DEVICES with the B250-XT+ HEADSET 12. Start with the B250-XT+ headset turned off. Turn both Bluetooth devices on, and make sure both are ready to accept the headset connection.
-
Page 15: Proximity Pairing
4. The headset lights should now be alternating red and blue. 5. The headset initiates pairing activity, and the user has to accept the incoming pairing invita- tion on the phone. NOTE: This may include entering the pin number “0000” (four zeros). VXi BlueParrott B250-XT+ User Guide ®... -
Page 16: Microphone Positioning
Slight adjustment of the microphone may help to achieve optimum performance. It is important that the word “TALK” (which is embossed on the microphone housing) is positioned towards your mouth. The word “TALK” is embossed at the base of the microphone VXi BlueParrott B250-XT+ User Guide ®... -
Page 17: Making A Call
3. Dial the phone and make a call as usual. Or use the headset’s Voice Dial function (page 20) to make a call. 4. To end call, quickly press the MFB on the headset and release. You will hear a voice prompt, “Call terminated.” The call will end and the headset will enter Standby Mode. VXi BlueParrott B250-XT+ User Guide ®... -
Page 18: Answering A Call
2. When your cell phone rings, you will hear ring tones in the headset. Answer the call by quickly pressing and releasing the headset’s MFB. You will hear 2 rising tones and the MFB will blink blue every second. 3. To end the call, quickly press the MFB on the headset and release. You will hear a voice prompt, “Call terminated,” and the headset will enter Standby Mode. VXi BlueParrott B250-XT+ User Guide ®... -
Page 19: Operation While Using The Charger/Adapter
OPERATION WHILE USING THE CHARGER / ADAPTER The B250-XT+ headset will operate from battery power or from the AC or DC charger/adapter. NOTE: Do not attach the charger mid-call. This will cause the headset to reset and the call will be sent back to the phone. -
Page 20: Additional Functions
(if available). VOICE DIAL To use the Voice Dial feature of the cell phone, quickly press the MFB on the headset. A tone will be heard and the phone’s voice dialer should open. Clearly speak the command. Repeat quick press of the MFB to end Voice Dial. The headset must be in Standby Mode to use this feature. More functions on page 17 VXi BlueParrott B250-XT+ User Guide ®... -
Page 21: Transfer Audio
If the headset was paired with multiple devices and the last connected device is not available (turned off, out of range,etc.), the headset will attempt to connect to the second-to-last device it was connected to, etc. It is also possible to reconnect to the device with a quick press of the headset’s MFB. A tone and the voice prompt,“Your headset is connected,” should be heard. VXi BlueParrott B250-XT+ User Guide ®... -
Page 22: Reset Paired Devices List
This procedure may be necessary if the headset will not pair or connect to a device. NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will need to be paired to the device after reset has occurred. VXi BlueParrott B250-XT+ User Guide ®... -
Page 23: Call Waiting/Rejecting A Call
NOTE: Depending on your phone’s programming, you may be able to switch between calls from the phone’s call handling menu. 3. To reject an incoming call while on an active call, press and hold the MFB for 2 seconds. The incoming call will go to voicemail. VXi BlueParrott B250-XT+ User Guide ®... -
Page 24: Specifications
To replace, simply unscrew the tip of the auto adapter (see photo, right) and remove the fuse (be careful not to lose the spring that is inside). Put new fuse in and screw the tip back on. VXi BlueParrott B250-XT+ User Guide ®... -
Page 25: Functions & Indicators
Mute (On/Off) Volume Up / 2 seconds NONE NONE seconds while muted Voice Dial MFB / 1 quick press NONE Single tone NONE (Start/End) Last Number Volume Down NONE Single tone NONE Redial (1 second) VXi BlueParrott B250-XT+ User Guide ®... - Page 26 (if available) Transfer Audio Volume Down (1-2 seconds) NONE NONE NONE Volume Up/Volume Down Disable LEDs NONE Short tone NONE (quick press) Volume Up/Volume Down Enable LEDs LEDs go on Short tone NONE (quick press) VXi BlueParrott B250-XT+ User Guide ®...
- Page 27 Red light, fast flash “Battery low” @ 20 seconds Incoming Call Hold MFB (press twice) NONE NONE NONE Accept MFB (quick press) NONE NONE NONE Incoming Call/Held Reject Incoming MFB (1-2 seconds) NONE NONE NONE Call/Held VXi BlueParrott B250-XT+ User Guide ®...
- Page 28 4 rising tones NONE Multipoint Mode (quick press) Disable MFB / Vol Up & Vol Down NONE 4 falling tones NONE Multipoint Mode (5-6 seconds) Double flashing Connected A2DP NONE NONE NONE blue MFB VXi BlueParrott B250-XT+ User Guide ®...
-
Page 29: Warranty
(1) VXi warrants that your B250-XT+ headset system will be free from defects in material and workmanship for one year from the date of purchase. If, during the first year from the date of purchase, your B250-XT+ headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge. -
Page 30: Fcc Notice To Users
– Reorient or relocate the receiving antennae – Increase the separation between the equipment and the receiver – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. VXi BlueParrott B250-XT+ User Guide ®... -
Page 31: Ic Notice To Canadian Users
This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la classe best conforme à la norme NMB-003 du Canada). VXi BlueParrott B250-XT+ User Guide ®... - Page 32 ® www.vxiuk.com...
Need help?
Do you have a question about the B250-XT and is the answer not in the manual?
Questions and answers