GE DPSB620GC Dimensions And Installation Information

DPSB620GCCC/WW
GE Profile Super 7.0 Cu. Ft. Capacity Gas Dryer
™
Dimensions and Installation Information (in inches)
Exhaust Options: When viewed from the
front of the unit, exhaust 3-way via rear, left
and bottom. Dryer is shipped exhausted to
the rear. Alternate exhausting knockouts are
supplied. Left or bottom exhaust requires a
conversion kit.
Gas: An individual properly-grounded
branch circuit, with a three-prong grounding-
type receptacle, protected by a 15 or 20
amp circuit breaker or a time-delay fuse is
required.
Gas Dryer Electric Rating: 120V, 60Hz, 6A
Gas (BTU/HR): 25,000. Factory-equipped for
natural gas. Tested for LP gas. LP gas supply
requires a conversion kit. Check installation
instructions for correct kit and have a
qualified gas technician install a conversion
kit. See dryer ducting information for proper
installation.
Note: Dryer wall outlet must be located within
36" of service cord entry and accessible when
dryer is mounted in position.
Installation Information: For complete
information, see installation instructions
packed with your dryer.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
23-1/2
or
™
service,
28-1/4
25-1/2*
8-1/2
Side View
Washer/Dryers SC QSart
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
42
11-1/2
36
2
2-1/2
Rear View
Specification Revised 10/07
27
3-1/2
Listed by
Underwriters
Laboratories
270180