Deflection Adjustment - Ski-Doo Grand Touring 500 1998 Shop Manual

1
5
A00D08A
1. Upper O-ring
2. Force
3. Lower O-ring
4. Reference rule
5. Deflection

DEFLECTION ADJUSTMENT

S-Series
Adjust pulley distance according to specification,
refer to PULLEY DISTANCE AND ALIGNMENT
05-05, then adjust drive belt deflection using Allen
screws, as shown.
To increase deflection: turn Allen screws clock-
wise.
To decrease deflection: turn Allen screws coun-
terclockwise.
NOTE: Turn Allen screws 1/4 turn at a time, then
rotate driven pulley to allow drive belt to settle in
pulley. Check deflection, repeat as required.
2
3
4
Section 05 TRANSMISSION
Subsection 02 (DRIVE BELT)
-
A15D0WA
1. Allen screw with jam nut
Allen screws should be restrained while tighten-
ing jam nut to prevent throwing adjustment out.
Use drive belt tension adjuster (P/N 529 0087 00).
A15B05B
Restrain Allen screws with the wrench and tight-
en nut with the socket using socket handle provid-
ed in tool box.
+
1
529 0087 00
05-02-3