11. DEVICE CLEANING
11.1. General recomendations
Prior to cleaning, it is necessary to
disconnect th e balance from the
mains.
Do not use aggressive cleaning
agents (e.g. solvents, chlorine
preparations, corrosive chemicals,
bleach).
11.2. Cleaning instructions
• GLASS PANES AND COMPONENTS can be cleaned using window cleaner.
• WEIGHING PANS AND STAINLESS STEEL OR ALUMINIUM COMPONENTS can be cleaned using a cloth slightly
soaked in a solution of water and gentle cleanser (e.g. soap or dishwashing liquid).
• OPERATION PANEL AND HOUSING can be cleaned using a cloth slightly soaked in a solution of water and gentle
cleanser (e.g. soap or dishwashing liquid).
• Dry sample leftovers can be removed using either brush or handheld vacuum cleaner.
• Clean components can be dried using soft cloth or dust-free paper towel, with this the remaining moist will be absorbed.
• Install all the components providing they are completely dry.
Use soft cloths made of microfiber,
natural fiber or man-made fiber. Avoid
using abrasive cloths or cloths that
might scratch the surface.
Neither use substances of sharp
structure
nor
intended
scrubbing.
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device.
Make sure that neither dust nor
for
liquid gets inside the weighing
system (device inside).