Connecting A Digital Video Signal (Lv-7365/Lv-7265) - Canon LV 7365 User Manual

Connecting a Digital Video Signal (LV-7365/LV-7265)

To project a source from audio video equipment with a digital video output such as an HDMI or DVI connector,
use a commercially available HDMI-to-DVI cable or the optional DVI digital cable to connect the Computer 2 input
[DIGITAL IN/ANALOG IN-2] connector of the projector as shown below.
To output the sound in stereo, connect to audio equipment.
audio video equipment
NOTE: An image may not be displayed depending on the specifications of the audio video equipment being used.
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
DIGITAL IN/
ANALOG IN-2
S-VIDEO
IN
VIDEO
IN
hdMi-to-dVi cable
(not supplied)
audio video equipment
S-VIDEO VIDEO
HDMI OUT VIDEO OUT
hdMi connector
dVi digital cable
(Optional: lV-Ca29)
S-VIDEO VIDEO L
VIDEO OUT AUDIO OUT
DVI OUT
dVi connector
AUDIO IN
AUDIO IN ANALOG IN-1
L
DIGITAL IN /
SERVICE PORT ANALOG IN-2 AUDIO OUT
R
AUDIO IN
(LV-7365 / LV-7265)
audio equipment
L R
AUDIO OUT
audio cable (not supplied)
R
22
2. Installation and Connections
AUDIO IN
L R