Connecting Your Pc Or Macintosh Computer (Lv-7260/Lv-X7) - Canon LV 7365 User Manual

Connecting Your PC or Macintosh Computer (LV-7260/LV-X7)

NOTE: The ANALOG IN connector supports Plug & Play (DDC2).
iBM PC or Compatibles (desktop type)
or Macintosh (desktop type)
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available
scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
• When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet.
AUDIO IN
L
S-VIDEO
IN
SERVICE PORT
R
VIDEO
IN
AUDIO IN
audio cable
(not supplied)
PHONE
NOTE: For older Macintosh, use
a commercially available pin
adapter (not supplied) to connect
to your Mac's video port.
2. Installation and Connections
ANALOG IN
ANALOG IN
Vga cable (supplied)
to mini d-sub 15-pin connector on the projector.
it is recommended that you use a commercially
available distribution amplifier if connecting a
signal cable longer than the supplied one.
PHONE
iBM Vga or Compatibles (notebook
type) or Macintosh (notebook type)
8