Cost shown as charging units or currency
• You can set the phone to show the remaining talk-time in charging units or units of
currency. For this, you may need the PIN2 code, see p. 46.
→
1
Select
Options
Settings
2
If you choose Currency, a note requesting you to write the unit price is shown. Key
in the cost of your home network charging or credit unit and press OK.
3
Write a name for the currency. Use a three-letter abbreviation, for example, GBP.
Note: When no more charging units or currency units are left, calls may only be
possible to the emergency number programmed into your phone (e.g. 112 or other
official emergency number).
Setting a call cost limit for yourself
→
1
Select
Options
Settings
2
The phone requests you to enter the limit in units. For this you may need the PIN2
code. Depending on the
Show costs in
units or currency.
When the charging limit you have set yourself is reached, the counter stops at its
maximum value and the note
→
calls, go to
Options
Settings
see p. 46.
Erasing call cost counters - Select
code, see p. 46. To clear an individual event, scroll to it and press
→
Show costs
in. The options are
→
→ On.
Call cost limit
setting, enter either the amount of charging
Reset all calls' cost counter
is displayed. To be able to make
→
→ Off. For this you need the PIN2 code,
Call cost limit
→
Options
Clear
counters. For this you need the PIN2
Currency
and Units.
.