•
Receive adverts
- Define whether you want to receive multimedia message
advertisements or not.
•
Receive report
- Set to Yes, if you want the status of the sent message (Pending, Failed,
Delivered) to be shown in the Log. See p. 28.
Note: Receiving a delivery report of a multimedia message that has been sent
to an e-mail address might not be possible.
•
Deny report sending
- Choose Yes, if you do not want your phone to send delivery
reports of received multimedia messages.
•
Message validity
- If the recipient of a message cannot be reached within the validity
period, the message is removed from the multimedia messaging centre. Note that the
network must support this feature.
allowed by the network.
•
Image size
- Define the size of the image in a multimedia message. The options are:
Small
(max. of 160 x 120 pixels) and
•
Speaker
- Choose
Loudspeaker
message to be played through the loudspeaker or the earpiece. For more information,
see 'Loudspeaker', p. 20.
Settings for e-mail
Go to
Messaging
and select
Open
Mailbox in use
to select which mailbox you want to use.
Settings for Mailboxes
Select
Mailboxes
to open a list of mailboxes that have been defined. If no mailboxes have
been defined, you will be prompted to do so. The following list of settings is shown:
•
Mailbox name
- Write a descriptive name for the mailbox.
•
Access point in use (Must be
Maximum time
is the maximum amount of time
Large
(max. 640 x 480 pixels).
or Normal, if you want the sounds in a multimedia
→
→ E-mail.
Options
Settings
defined) - The Internet Access Point (IAP) used for the