Transferring Tracks To A Mobile Phone - Sony Giga Juke NAC-HD1E Operating Instructions Manual

Transferring tracks to a mobile phone

1
Connect the mobile phone to the USB
connecting jack on the unit.
2
Set the connected mobile phone to
the USB connection mode.
Refer to the operating manual of
your mobile phone for the respective
procedure.
3
Enter the Function menu and select
[HDD JUKEBOX].
Make sure the TRANSFER button is set
to mobile phone (page 46).
4
Press TRANSFER on the remote
control or the unit.
5
If the storage medium selection
display appears, select the storage
medium.
If the connected mobile phone consists
of only one drive, then the storage
medium selection display does not
appear.
6
Select [Setting].
You can specify the destination folder
in the mobile phone and the transfer
format for Linear PCM tracks.
7
Select [Select folder at destination],
and then select the destination folder
from the pull-down menu.
Standard

setting
Root
setting
Select
( Factory setting)

* Depending on the mobile phone model,
tracks may be saved to the "\\Music" folder,
but may not be played on the phone.
0
GB
Tracks are saved to "\\Music"
folder*.
Tracks are saved to the root
directory of the destination.
Enter the folder name when
you change the destination
folder.
8
If you are transferring Linear PCM-
format tracks, select [Conversion
system], and then select the desired
item from the pull-down menu to
convert the tracks to a transferable
format.
If you are transferring tracks in another
format, go to step 10.
Auto The unit automatically selects

and transfers tracks with a
format that can be played on
the connected device.
Select Use this item to select the bit
format rate in step 9.
( Factory setting)

9
If you selected [Select format] in step
8, select the bit rate from the [Bit rate]
pull-down menu.
10
Select [Close].
11
Select the album, playlist, or tracks
that you want to transfer.
12
Select [Execute] or press TRANSFER.