Table Of Contents; Imprint; Contents - Holzstar KGZ 305 E Operating Instructions Manual

Imprint

Product identification
Chop- and Mitre Saw
KGZ 305 E
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt/Bamberg
Fax: 0049 (0) 951 96555 - 55
Email: info@holzstar.de
Internet: www.holzstar.de
Information about the operating instructions
Genuine operating instructions
Published: 09.08.2019
Version: 1.09
Language: English
Author: ES/FL
Copyright information
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Stürmer is the sole owner of the content of these operat-
ing instructions.
Forwarding and reproduction of this document as well as
use and notification of its content is not permitted without
explicit consent. Infringements will lead to claims for
damages.
Subject to technical modifications and error.
2
Item nuber
5702305

Contents

Imprint ................................................................... 2
Contents................................................................ 2
1 Introduction .............................................................3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer ........................................................... 3
2 Safety........................................................................3
2.1 Legend of symbols.............................................. 3
2.2 Personal protective equipment ........................... 4
2.3 Safety labels on the chop- and mitre saw........... 4
3 Intended Use............................................................5
4 Technical Data .........................................................5
4.1 Type plate KGZ 305 E ........................................ 5
5 Transport, packaging and storage ........................6
5.1 Delivery and transport......................................... 6
5.2 Packaging ........................................................... 6
5.3 Storage ............................................................... 6
6 Description of the device........................................6
7 Setting up and Installation .....................................7
7.1 Set up the chop- and mitre saw .......................... 7
7.2 Electrical connection........................................... 8
8 Operation ............................................................8
8.1 Pre-adjustment ................................................... 9
8.2 Cutting execution .............................................. 11
9 Care, maintenance and repair ..............................12
9.1 Care after finish work........................................ 12
9.2 Maintenance and repair .................................... 12
10 Disposal, reusing used machines .....................14
10.1 Decommissioning ........................................... 14
10.2 Disposal of electrical equipment ..................... 14
10.3 Disposing of lubricants.................................... 14
11 Troubleshooting ..................................................15
12 Electrical circuit diagram....................................16
13 Spare parts...........................................................16
13.1 Spare parts orders .......................................... 16
13.2 Spare parts drawing KGZ 305 E..................... 17
14 EC Declaration of Conformity ............................18
15 Notes ....................................................................19
KGZ 305 E | Version 1.09 | EN