Bosch rexroth HyDrotrAC GFt Operating Instructions Manual page 30

30/64 HyDrotrAC GFt >130 knm | Assembly
procedure
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
Bosch Rexroth AG, Issue 10.2019, RE 79094
4. Also consider the weight of the axial-piston motor. For the weight of the axial-
piston motor, refer to the operating instructions of the motor in appendix C
"Mounting parts" of the planetary gearbox's material number-specific operating
instructions.
5. Transport the planetary gearbox to the application machine with the axial-piston
motor installed.
6. Make sure that the surface is stable.
7. Place the planetary gearbox with the cover plate down on two suitable squared
timbers. Secure the planetary gearbox against tipping over.
8. Attach the axial-piston motor carefully using appropriate means of attachment
e.g. eye bolts, swivel hooks, shackles or suitable equipment on an appropriate
lifting equipment such as a crane hook. Observe the information in the operating
instructions supplied with the axial-piston motor. For the instructions, please
refer to appendix C "Mounting parts" of the material number-specific operating
instructions.
9. Tighten the means of attachment without lifting the axial-piston motor.
10. Loosen the motor mounting screws 3 and remove the axial-piston motor from
the planetary gearbox.
11. Remove the axial-piston motor from the planetary gearbox fitting. Make sure that
the axial-piston motor is not tilted.
12. Put the axial-piston motor down. Also observe the notes in the operating
instructions of the axial-piston motor in appendix C "Mounting parts" in the
material number-specific operating instructions.
13. Remove all means of attachment, transport and lifting equipment.
Installing the planetary gearbox at/into the machine or chassis frame.
1. For installation, strictly observe the corresponding data in the dimensioned
drawing of the planetary gearbox in appendix D "Technical data / Drawings" of
the material number-specific operating instructions.
2. Also observe the primary operating instructions of the machine or vehicle and
the manufacturer's frame drawing.
3. For the planetary gearbox weight, refer to appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
4. Transport the planetary gearbox to the application machine.
5. Make sure that the surface is stable.
6. Place the planetary gearbox with the cover plate down on two suitable squared
timbers. Secure the planetary gearbox against tipping over.
7. Attach the planetary gearbox carefully using appropriate means of attachment
e.g. eye bolts, swivel hooks, shackles or suitable equipment on an appropriate
lifting equipment such as a crane hook. Refer to chapter 6.1 "Transporting the
HYDROTRAC GFT".
8. Tighten the means of attachment without lifting the planetary gearbox.
9. Make sure that the part of the machine or chassis frame to which the planetary
gearbox is to be mounted is free of dirt and foreign objects.
10. Lift the planetary gearbox into the machine or chassis frame.