PowerXL B-AFO-002G Owner's Manual page 11

Using the Accessories
Using the Rotisserie Spit
1. Insert the Drip Tray below the bottom heating elements
(at the very bottom of the Unit [see Fig. i, p. 9]).
2. With the Forks removed, force the Rotisserie Spit
through the center of the food lengthwise.
3. Slide the Forks (A) onto each side of the Spit
and secure them in place by tightening the two
NOTE:
Set Screws (B).
the Rotisserie Spit better, insert the Rotisserie Forks
into the food at different angles (see Fig. vi).
4. Hold the assembled Rotisserie Spit at a slight angle
with the right side higher than the left side and insert
the left side of the Spit into the Rotisserie connection
inside the Unit (see Fig. vii).
5. With the left side securely in place, lower the right side
of the Spit into the Rotisserie connection on the right
side of the Unit (see Fig. viii).
6. To remove cooked food, insert a large fork into the
food, twist left, and raise to remove the Spit from the
left slot and then remove the food from Unit with slight
lifting motion. Transfer the food to a carving board
or serving plate.
To support the food on
A
FIG. vi
FIG. vii
FIG. viii
PowerXL Air Fryer Grill™ | Model: B-AFO-002G
B
11