Setup: Sdh/Sonet/Otn; Signal Overview - VeEX RXT-6200 User Manual

6.0 Setup: SDH/SONET/OTN

Accessing Setup: Please see the RXT-1200 Platform manual Getting Started section to launch Test Applications.
SONET Home Menu
The Setup page has tabs for setting the OTN, and SDH/SONET.
Go back to top Go back to TOC

6.1 Signal Overview

Tap on the Signal tab to set up the Transmitter and Receiver interfaces and associated test parameters prior to running
a test.
Signal tab
TX and RX Configurations
The Transmitter (TX) and Receiver (RX) configurations are grouped into a simple yet intuitive block diagram.
The TX and RX signal parameters can be modified by tapping the applicable block that brings up a new dialog
RXT-6200_RXT6000e_Module_Manual Page 18 of 387