Power Cord - Shark Navigator Pet ZU62ANZ Owner's Manual

2
(Click)
1
(Click)
1. Insert Wand into Pod.
2. Insert Handle into wand.
3. Attach Hose to back of pod.
4. Attach hose to Clip on wand.
5. Insert Hose Clip onto base of pod and remove tape.
6. Store Accessories on tool storage posts.
For proper operation, ensure all parts are firmly clicked into place.
AU s h a r kc l e a n . c o m . a u N Z s h a r kc l e a n . c o . n z
ASSEMBLY
(Click)
(Click)
4
(Click)
3
5
UPPER CORD HOOK
For cord access, rotate upper hook down
and remove cord.
ASSEMBLY
Cord Clip
Upper Cord Hook
6
Tool Storage Posts

POWER CORD

CORD CLIP
Use cord clip located on the side of wand to
hold cord in place while vacuuming.
AU 0 2 8 8 0 1 76 6 6 N Z 0 8 0 0 1 1 2 6 6 0