Intended Use - Cub Cadet L20 Manual

Intended use

¾ Removal of guards or replacement of the line
spool must only be performed with the power
pack removed. Use only original line spools and
observe the fitting instructions!
¾ Ensure that ventilation slots are free from dirt.
¾ Do not clean the trimmer using water.
¾ Store the device in a secure location.
¾ Store the device out of reach of children.
¾ Let the device cool down before putting it
away and/or storing it.
General safety information
¾ Never replace the non-metallic cutting element
with a metallic cutting element!
¾ Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions, remove
the power pack in advance.
¾ Repairs must only be performed by a qualified
technician or service centre. Specialist work-
shop addresses can be found on our website.
Intended use
The trimmer with inserted line spool is intended
solely for the care of lawn edges and smaller grass
and lawn areas in private households.
Any other use is classed as an unintended use. The
user is liable for any damages arising from uninten-
ded use.
Incorrect/abnormal use
This trimmer should not be used in public facilities,
parks, sports grounds, roads etc. nor in agriculture or
forestry.
To prevent bodily injury to the user, the trimmer must
not be used to cut thicker branches or for shredding for
the purpose of composting.
Safety information
¾ Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and fires.
¾ This trimmer is intended for the care of lawn
edges and smaller grass and lawn areas in
private households. The device must not be
used for purposes other than those intended
because of the risk of bodily injury to the user or
other persons.
¾ Only use the trimmer in daylight or under
bright artificial light. Keep your work area clean
and well lit.
¾ Only use the trimmer in dry weather con-
ditions. Keep the device away from rain or
dampness and do not use it during a storm. The
ingress of water into the trimmer increases the
risk of an electric shock.
¾ Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage. Always bear this
in mind.
¾ Replace all worn or damaged information
signs on the device.
¾ Only use power packs and chargers approved
by the manufacturer. The designations of the
approved power packs / chargers are listed in the
enclosed CE Declaration of Conformity.
Identification plate Q
Position
The identification plate is located on the trimmer
casing.
Note
The label has the status of a certificate.
It must never be altered or obliterated.
Structure
1 Manufacturer
2 Model name
3 Rated voltage, current type
4 Current
5 Max. spindle speed in rpm(LO/HI range)
6 Guaranteed sound level
7 Protection class
8 Disposal note
9 CE mark
10 Device group
11 Year of manufacture
12 Model number
13 Serial number barcode
14 Serial number
EN
21